Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
Currently available in 1 gallon jugs.
|•Application Temperature: Above 50°F (10°C)
•Open Assembly Time: 15 minutes (70°F./50% RH)
•Total Assembly Time: 15-20 minutes (70°F./50%RH)
•Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
•Required Pressure Application : 100-250 psi, depending on substrates
•Method of Application: For most consistent coverage a mechanical spreader is recommended.
•Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.